Find additional guides and references for deep cleaning, appliance cleaning and maintenance, forgotten areas, and keeping the kitchen functioning over time. Use these resources alongside the Kitchen Reset chapter of the Kitchen Plan Handbook whenever you need a little more information.
Before You Start
Remove food from the section you're cleaning. You don't necessarily need to empty the entire refrigerator at once—cleaning one shelf or drawer at a time is completely fine.
Shelves & Drawers
• Remove shelves and drawers when they're designed to come out.
• Wash removable pieces with warm, soapy water.
• Wipe interior walls and surfaces.
• Clean underneath drawers and along shelf supports where spills collect.
• Dry everything before replacing it.
Avoid suddenly exposing very cold glass shelves to hot water because rapid temperature changes can potentially damage the glass.
Door Shelves & Seals
Remove crumbs and residue from door shelves.
Wipe around the rubber door gasket, including inside the folds where crumbs, sticky residue, and moisture can collect.
Stubborn Spills
For dried spills, place a warm, damp cloth over the area for several minutes before wiping. Softening the mess first is usually much easier than aggressively scrubbing it.
• Remove loose crumbs and food debris.
• Wash removable bins and drawers.
• Wipe interior surfaces with an appliance-safe cleaner.
• Clean drawer tracks and corners.
• Dry surfaces before returning food.
• Check that packages aren't blocking vents or preventing drawers or doors from closing.
For significant frost buildup, follow the freezer manufacturer's defrosting instructions.
Don't attack built-up ice with knives or other sharp tools—they can damage the freezer.
You don't need to empty the entire kitchen.
Choose one cabinet or drawer:
• Remove the contents.
• Vacuum or wipe out crumbs and loose debris.
• Wash sticky or dirty surfaces.
• Dry the area.
• Check for damaged packaging, spills, moisture, or pests.
• Return the contents.
• Empty the bin.
• Remove loose debris.
• Wash the interior and exterior with soap or an appropriate cleaner.
• Pay attention to the lid, rim, handles, and bottom.
• Rinse if needed.
• Allow it to dry before replacing the liner.
If something has leaked underneath the bin, clean the floor beneath it too.
Cleaning
• Wipe shelves, drawers, walls, and door storage.
• Clean spills before they harden.
• Clean the door gasket and its folds.
• Wipe handles and exterior surfaces.
Maintenance
• Keep interior vents unobstructed.
• Make sure the door closes and seals completely.
• Check the gasket for cracks, tears, or areas that no longer seal.
• Vacuum or clean accessible condenser coils when recommended by the manufacturer.
• Replace the water filter according to the refrigerator's instructions if it has one.
• Keep the refrigerator at 40°F or below, ideally around 37°F.
Cleaning
• Remove crumbs, spills, and loose debris.
• Wash removable baskets or drawers.
• Clean door or drawer seals.
• Remove excessive frost according to the manufacturer's instructions.
Maintenance
• Keep vents clear.
• Make sure doors and drawers close completely.
• Inspect seals for damage.
• Avoid allowing frost or ice to interfere with drawers, vents, or the door.
• Keep the freezer at 0°F (-18°C).
Cleaning
• Remove food debris from the bottom of the dishwasher.
• Clean the filter if the dishwasher has a removable filter.
• Check spray-arm holes for trapped debris.
• Wipe the door edges, gasket, detergent dispenser, and areas the normal wash cycle doesn't reach.
Maintenance
• Clean the filter on the schedule recommended for your model.
• Make sure spray arms can rotate freely.
• Remove mineral buildup as needed using a dishwasher-cleaning product appropriate for the machine.
• Check that racks and wheels move correctly.
• Don't ignore persistent standing water, drainage problems, leaks, or unusual noises.
Cleaning
• Remove loose crumbs and burnt food once the oven is cool.
• Clean racks separately when necessary.
• Clean interior surfaces according to the manufacturer's instructions.
• Wipe the door and handle.
Maintenance
• Check the door gasket for obvious damage.
• Keep vents unobstructed.
• Don't line the bottom of the oven with foil unless the manufacturer specifically says it's safe for that model.
• If using a self-cleaning cycle, follow the manufacturer's instructions and provide good ventilation.
Cleaning
For electric or induction cooktops:
• Allow the surface to cool.
• Remove loose debris.
• Use a cleaner appropriate for the cooktop material.
• Avoid abrasive tools that can scratch glass surfaces.
For gas cooktops:
• Remove grates and burner caps when designed to be removable.
• Clean food and grease buildup.
• Make sure burner openings aren't clogged.
• Allow components to dry completely before reassembling.
Maintenance
Pay attention to burners that ignite poorly, heat unevenly, or behave differently than usual rather than repeatedly working around the problem.
Cleaning
• Wipe spills and splatters from the interior.
• Remove and wash the turntable.
• Clean underneath the turntable.
• Wipe the door, handle, and control panel.
Easy Steam-Cleaning Trick
Heat a microwave-safe bowl of water until the interior becomes steamy. Let it sit briefly with the door closed, then wipe the softened residue away.
Maintenance
• Keep the door and sealing surfaces clean.
• Don't operate the microwave when empty.
• Stop using it if the door, latch, or sealing surfaces are significantly damaged.
Cleaning
With the disposal off, clean the accessible rubber splash guard where food residue can collect.
Running cold water while operating the disposal can help carry food through the system.
Maintenance
• Use plenty of water when grinding food.
• Avoid putting grease or cooking oil down the disposal.
• Don't overload it with large amounts of food at once.
• Never put your hand inside the disposal.
⚠️ If something is stuck, disconnect power before attempting any hands-on work and follow the manufacturer's instructions.
Cleaning
• Wash removable parts regularly.
• Empty used grounds promptly.
• Wipe the warming plate and exterior.
Maintenance
Mineral deposits accumulate inside coffee makers over time. Descale according to the manufacturer's instructions, especially if brewing becomes slower or the machine indicates that cleaning is needed.
If you don't know the cleaning method for your specific machine, check the manufacturer's instructions first.
If vinegar is safe for your coffee maker, a common cleaning method is to run a cycle with white vinegar and water, followed by 2–3 cycles of plain water to thoroughly rinse the machine and remove the vinegar smell and taste.
For machines with special cleaning or descaling requirements, follow the manufacturer's instructions instead.
Cleaning
• Unplug and allow the appliance to cool.
• Empty the crumb tray.
• Remove loose crumbs.
• Wipe accessible surfaces.
Maintenance
Regularly removing crumbs helps prevent buildup and burning odors.
⚠️ Never immerse a toaster in water or insert metal utensils into the slots while it's connected to power.
Cleaning
• Unplug and allow it to cool.
• Wash the basket and removable components after greasy or messy foods.
• Wipe the interior and exterior.
• Check around the heating area for grease buildup once cool.
Maintenance
Avoid allowing grease and crumbs to accumulate near the heating element. Follow the manufacturer's instructions for cleaning nonstick components
Cleaning
• Wipe grease from the exterior and underside.
• Pay particular attention to areas directly above the stovetop.
Maintenance
Grease filters need periodic cleaning or replacement depending on the type.
Metal mesh filters are often washable; disposable filters should be replaced according to their instructions.
Some parts of the kitchen aren't part of normal everyday cleaning, which makes them easy to overlook. They don't need constant attention, but checking them occasionally can catch grease, crumbs, moisture, pests, and buildup before they become larger problems.
When an appliance can be moved safely and without damaging flooring, plumbing, gas lines, or electrical connections, occasionally check underneath and behind it.
Look for:
• Crumbs and dropped food
• Grease buildup
• Spills
• Dust and pet hair
• Moisture or leaks
• Pest activity
This can include refrigerators, stand-alone freezers, microwaves, countertop appliances, and other movable equipment.
⚠️ Don't pull out or disconnect a gas appliance unless you know it can be moved safely.
High surfaces collect more than you'd think, especially near the stove.
• Remove stored items.
• Dust or vacuum loose debris first.
• Wipe away grease and residue.
• Dry the surface before replacing anything.
Removing dry dust before introducing a wet cleaner prevents the deeply irritating experience of turning dust into gray kitchen mud.
The narrow area underneath lower cabinets catches:
• Crumbs
• Dust
• Hair
• Food splatter
• Sticky spills
Vacuum or sweep loose debris, then wipe the surface as needed.
If the toe-kick has gaps or damage, keep an eye out for signs that food or pests are getting behind it.
Crumbs, grease, and sticky residue can collect around hardware and moving parts.
Use a cloth, small cleaning brush, or cotton swab to reach:
• Hinges
• Drawer tracks
• Corners
• Handle attachments
• Shelf supports
Avoid soaking hardware or allowing large amounts of liquid to run into inaccessible areas.
Even when the bin itself looks clean, leaks can collect underneath it.
Move the bin occasionally and check for:
• Sticky residue
• Moisture
• Food debris
• Odors
• Mold
• Pest activity
Clean and completely dry the floor before replacing the bin.
Areas around the stove, sink, trash can, and food-preparation spaces can gradually collect splatter.
Pay particular attention to:
• Grease near the stove
• Food splashes
• Areas behind countertop appliances
• The wall around the trash can
• Seams and edges along the backsplash
Use a cleaner appropriate for the wall or backsplash material.
Grease doesn't politely remain on the stovetop.
Check:
• The underside of the range hood
• Grease filters
• Cabinet surfaces above and beside the stove
• Nearby walls or backsplash
• Controls and handles
Grease buildup is generally much easier to remove before it becomes thick and sticky.
Don't forget the areas that aren't immediately visible during normal sink cleaning:
• Behind the faucet
• Around the faucet base
• Under the rim or lip of the sink
• Drain and drain cover
• Sink accessories
• Seams where the sink meets the counter
These areas frequently stay damp, making them worth checking for buildup or mold.
Remove enough items to actually see the bottom of the cabinet.
Check for:
• Plumbing leaks
• Dampness
• Water stains
• Mold or mildew
• Pest activity
• Leaking cleaning products
• Damaged containers
⚠️ Persistent moisture under the sink should be investigated rather than repeatedly wiped up. A hidden plumbing leak can cause significantly more damage over time.
When an appliance is unplugged and safe to handle, check accessible cords and plugs for:
• Grease
• Dust
• Food residue
• Damage
• Fraying
• Discoloration or signs of overheating
⚠️ Don't continue using an appliance with a damaged cord, exposed wiring, melting, scorching, or other signs of an electrical problem.
Crumbs have an almost supernatural ability to migrate into places no food has ever been prepared.
Occasionally check:
• Room corners
• Along baseboards
• Where cabinets meet the floor
• Beside appliances
• Between appliances and cabinets
• Around vents
• Thresholds and flooring transitions
A vacuum crevice attachment or narrow cleaning brush makes these areas much easier to reach.
A forgotten area doesn't need cleaning simply because it exists.
When you check one, look specifically for food, grease, moisture, mold, odors, pests, damage, or unusual buildup. If it's clean, leave it alone and move on.
Clean From Top to Bottom
When you're cleaning several areas at once, start with higher surfaces and work downward. Dust and crumbs that fall can be cleaned up with the floor instead of making you clean the same area twice.
Vacuum Before You Wipe
For cabinets, drawers, refrigerator shelves, and other crumb-filled spaces, vacuum or brush out loose debris before using a wet cloth. Wet crumbs are significantly more annoying than dry crumbs.
Let the Cleaner Do the Work
For greasy or dried-on messes, apply the appropriate cleaner and give it time to work before scrubbing. A few minutes of soaking can save a lot of unnecessary effort.
Steam the Microwave Instead of Scrubbing It
Heat a microwave-safe bowl of water until the microwave becomes steamy. Leave the door closed for a few minutes, then wipe the interior. The steam helps loosen dried food and splatters.
Use an Old Toothbrush for Tiny Spaces
A clean old toothbrush is useful for faucet bases, appliance seams, refrigerator gaskets, cabinet hardware, grout, and other places a regular sponge can't reach.
Put a Towel Under the Refrigerator Drawers
Before removing refrigerator drawers or shelves for cleaning, put a towel on the floor in front of the refrigerator. Any mystery liquid hiding underneath them has somewhere to go besides directly onto the floor.
Use a Vacuum Crevice Tool for Appliance Gaps
The narrow attachment can reach crumbs beside appliances, along cabinet edges, underneath toe-kicks, and in other spaces that are difficult to sweep.
Line Hard-to-Clean Areas When Appropriate
Removable liners can make some drawers, cabinets, and under-sink areas easier to clean after spills. Avoid covering vents or using liners anywhere the appliance manufacturer advises against them.
Take a Picture Before Disassembling Something
Before removing refrigerator shelves, dishwasher filters, stove components, or several appliance pieces at once, take a quick photo. Future You now has assembly instructions without having to play where the hell did this piece come from?
Keep Appliance Model Numbers Somewhere Accessible
Take a photo of the model/serial label or save the information somewhere easy to find. It makes finding the correct manual, replacement filter, replacement part, or troubleshooting instructions much easier later.
Search the Model Number Before Guessing
If you're unsure how to remove a filter, clean a component, run a maintenance cycle, or disassemble part of an appliance, look up the manufacturer's instructions for that specific model. Appliances that look almost identical can have very different requirements.
Use a Dishwasher-Safe Basket for Small Parts
When manufacturer instructions allow dishwasher cleaning, small removable pieces can sometimes be placed in a dishwasher-safe basket so they don't disappear into the bottom of the machine.
Use Baking Soda for Gentle Scrubbing
A baking-soda-and-water paste can help with some stubborn residue when an abrasive cleaner would be too aggressive. Check that the surface can tolerate it first.
Clean Grease Before It Gets Old
Fresh grease is dramatically easier to remove than the sticky layer it becomes after repeatedly being heated. A quick wipe around the stove and range hood can prevent a much nastier deep-clean later.
Put Maintenance Supplies Near the Appliance When Practical
Replacement filters, cleaning tablets, specialty brushes, or appliance-specific supplies are easier to remember when they're stored somewhere logical and easy to find.
Write the Replacement Date on Filters
When replacing a refrigerator water filter, range-hood filter, or another regularly replaced component, write the installation date on it or save the date somewhere accessible. No more staring at it six months later thinking, ...when did we change this?
Don't Turn Every Reset Into a Project
If you pull out a trash can and discover the floor underneath needs cleaning, clean that area. You don't also have to pull out every appliance, reorganize three cabinets, descale the coffee maker, and suddenly find yourself scrubbing the ceiling at 1:00 a.m.
Fix Recurring Problems Instead of Repeatedly Cleaning Around Them
If the same puddle, grease spot, overflowing cabinet, strange odor, or pile of crumbs keeps coming back, look for the source. Sometimes the solution is maintenance, repair, or changing the setup—not cleaning the same problem forever.